Applications & Sectors

Designed for Modern HVAC and Building Envelope Applications

From hospitals and data centres to warehouses and airports, Clima Tech systems are selected to match the thermal, hygiene, durability and programme demands of each sector.

Sectors We Serve

Six Environments, Different Priorities

Every sector weighs the same three factors differently: thermal performance, hygiene and programme. What changes is which one dominates — and that is what drives product selection.

Commercial Buildings & IT Parks

Offices, campuses and technology parks need efficient air distribution across large floorplates, usually with tight ceiling voids and a fit-out programme measured in weeks. Lightweight pre-insulated ductwork installs faster in congested service zones and reduces the load transferred into the slab.

Typical: ENERMAX PIR™ ductwork; panels for plant rooms.

Hospitals & Pharmaceutical

Stringent air quality and thermal performance requirements. A fibre-free air path is often non-negotiable, and low leakage matters where pressure regimes separate clean and dirty zones. Smooth aluminium internal facings can be wiped down and do not shed.

Typical: ENERMAX PIR™ ductwork; panels for clean-area partitions.

Airports & Hotels

High-footfall spaces where ductwork is frequently exposed or semi-exposed and has to look finished as well as perform. Durable facings and a consistent joint line matter as much as thermal numbers, and programme pressure is usually severe.

Typical: ENERMAX PIR™ ductwork; panels for service enclosures.

Malls & Institutional

Large-volume conditioned spaces including retail, education and public buildings. Long duct runs make cumulative leakage and heat gain significant, and the weight of a fully insulated GI network becomes a real structural consideration.

Typical: ENERMAX PIR™ ductwork; underdeck insulation on large-span roofs.

Industrial Facilities

Manufacturing plants with specialised ventilation needs, often combined with an envelope that has to be built quickly and a roof that contributes heavily to internal heat load. This is where all three of our product families commonly appear on one project.

Typical: Wall panels, underdeck insulation, ductwork for conditioned areas.

Warehousing & Logistics

Large-span roof structures with a high roof-area-to-floor-area ratio, where solar gain through the deck drives both discomfort and cooling cost. Underdeck insulation typically delivers the largest improvement per rupee spent on these buildings.

Typical: Underdeck insulation; wall panels for the envelope.

Matching Product to Project

Which System Fits Where

Indicative guidance for early-stage planning. Final selection always depends on specification, site conditions and performance targets.

Product suitability by sector
Sector Pre-Insulated Ducts (ENERMAX PIR™) Insulated Wall Panels Underdeck Insulation
Commercial & IT parksPrimaryPlant rooms & partitionsWhere applicable
Hospitals & pharmaceuticalPrimaryClean-area partitionsWhere applicable
Airports & hotelsPrimaryService enclosures—
Malls & institutionalPrimaryBack-of-houseLarge-span roofs
Industrial & manufacturingConditioned areasPrimary envelopePrimary roof treatment
Warehousing & logisticsWhere conditionedPrimary envelopePrimary roof treatment

Indicative guidance only. Our engineering team will make a project-specific recommendation — see Quality & Engineering Support.

Scope Boundary

Where Our Duct Systems Are Not Intended for Use

We are explicit about scope so that specifiers can rely on the data we do publish. Our pre-insulated duct systems are not intended for the following duties:

  • Kitchen grease extract
  • Smoke extract or fire-rated ductwork
  • Chemical fumes
  • Solid-particle conveying
  • Temperatures outside the validated range
  • Uncontrolled process exhaust

If your project includes any of these duties alongside conventional air distribution, tell us early. We will scope our supply to the parts of the system where our product is the right answer.

Pre-insulated ductwork being installed overhead on a commercial fit-out
Within its validated envelope, the system covers supply, return, fresh-air and exhaust ductwork.

Applications FAQs

Which sectors do you supply most often?

Commercial buildings and IT parks, hospitals and pharmaceutical facilities, airports and hotels, malls and institutional buildings, and industrial plants and warehousing. The common thread is a need for reliable thermal performance combined with a programme that does not tolerate a slow envelope or duct installation.

Why does a fibre-free air path matter in healthcare and pharma?

Where insulation is exposed to the airstream there is a risk of fibres or particulates being carried into the space. In hospitals, cleanrooms, pharmaceutical production and food facilities that risk is unacceptable. Our ENERMAX PIR™ duct system has a rigid closed-cell core with aluminium facings on both sides, so nothing fibrous is exposed to the air path.

Is pre-insulated ducting suitable for data centres?

Yes — data centres are listed among the recommended applications for ENERMAX PIR™, within the validated pressure, velocity and temperature envelope. Low leakage and stable thermal performance both matter where cooling is the dominant energy cost.

Can all three products be used on the same project?

Frequently, yes. A manufacturing facility might use insulated wall panels for the envelope, underdeck insulation to control roof heat gain, and ENERMAX PIR™ ductwork for the conditioned areas — all coordinated through a single engineering point of contact.

Let’s Build More Efficient Systems

Share your drawings, specifications or site conditions and our engineering team will recommend the right core, thickness, facing and jointing system for the project.